Stellite 6

Stellite 6 is the most widely used of the wear resistant cobalt-based alloys and exhibits good all-round performance

 

 

 

 

Introduction

Cobalt based alloy/stellite alloy is a range of cobalt-chromium-tungsten alloys designed for wear resistance, corrosion resistance and high termal resistance. It has excellent wear and corrosion resistance performance at relatively high temperature. It is widely used in oil&gas, metallurgy, machinery, wood cutting, automotive, paper and food processing industries etc.

 Stellite 6 Chemical components
  C Si Mn P S Cr Ni Co Fe W Mo  Cu
max 1.30 1.80 0.50 0.030 0.030 32.00 3.00 bal 3.00 5.50 0.50  0.50
min 1.00 0.60       26.50       4.00    
  Cu                      
 Stellite 6 Mechanical property
Yield Strength
(Mpa)
Tensile Strength
(Mpa)
Elongation
(%)
Reduction
(%)
Hardness
(HRC)
Charpy Impact
(J)
 
541 896 <1   40-46HRC    
Heat treatment
Solution treatment :900°C±10°C,hold for 2.5 hours, AC to 300°C or below, cool in air
 stellite 6 Raw material: Round bar, rod, castings
valve components: seat rings.
Stellite 6/UNS R3006
Intro
STELLITE 6 is the most widely used of the wear resistant cobalt-based alloys and exhibits good all-round performance. It is regarded as the industry standard for general-purpose wear resistance applications
AMS 5387C-2001 UNS R3006

FAQ

Q1: What is the Warranty for our products ?

A1: We own high precision grading machine to control geometry dimensions and apply ultra fine grain size substrate coated with high performance coatings to guarantee the lifetime of our products, which can satisfy every working condition.If any quality problems on our side occurred in this period , we will take on the shipping cost and replacement.
Q2: Do you provide free samples?

A2: Yes, usually we provide free samples for testing under the condition of freight paid by customer.

Q3: What is your minimum order requirement?

A3: We will indicate the MOQ for each item in the quotation sheet. We accept the sample and trial order. If the quantity of single item can't reach the MOQ, the price should be sample price. 
Q4: What is the delivery time of your products?

A4: It depends on the inventory availability.If items needed are in stock, the delivery time would be within 8 work days, but if not the delivery time would be around 20 work days.
Q5: Can you manufacture  Special-shaped products?

A5: Yes, we can. We can produce both standard and special prosucts. We can make them according to your drawings and samples.
Q6: May I have my order working schedule ?

A6: Yes, we will send working schedule of your order each week. We will inspect and test all merchandise in case of damaging and missing parts before shipment. The detailed inspection pictures of the order will be sent to you for your confirmation before delivery.

Send your inquiry details in the below for free sample , Click "Send" Now !